← Back to AFM/DOD

April 26, 2021 — 2007-2013 AFM/DOD Lifter sizes.

By posi211 | Apr 26, 2021 12:00 AM | 0 views
April 26, 2021
2007-2013 AFM/DOD Lifter sizes.

Goldie, my 2007 Ebay truck with 189K

I purchased some parts and let someone else to install them, my fault for this failure. When I checked the lifters I found that the new lifters I purchased and installed are 2/16 shorter than the originals, so this was the ticking I just listen to for the last 2,000 miles. Hope the cam isn't tosted from it. Question, are there 2 part numbers for the AFM/DOD lifters?

1 Comment
430 Views

Replies (1)

By Crazed Performance Repair | Sep 1, 2026 8:26 PM
Apr 26, 2021
"

There are 2 different versions of factory AFM lifters. The difference isn't the length though and they both use the same part number. You should measure it from where the pushrod sits to the the roller. You will need to place something like a small socket inside of it then measure the length and compare. I don't believe the overall length should have a huge impact. Only the area I just suggested measuring.

Post a Reply

Login to post a reply.